Nacelle Heaters from Lund & Sorensen A/S are special designed for cold climate applications inside the nacelle. The Heater is rigid and reliable designed when harsh performance are required. The Heater can be supplied with either 400V or 690V.

The control of the Heater must be done externally.

 

The fan heaters have a safety cut-out which disconnect the supply if the motor fails or if overheating occurs.

After cooling down the fan heater, reset can be done with a screwdriver through the hole in the instrument panel. If the fan heater does not start after reconnection you should contact an electrician.

 

 

• Same size for all models

• Only one power supply cable

• No cable for control voltage

• Build-in overheating protection